Balmoral Standard A Frame Picnic Table

Balmoral Standard A Frame Picnic Table with Folding Seats

Please telephone us on 01307 468442 for a quotation if you require 3 or more

• Picnic Table: D154cm x W177cm x H74cm
• Table Top Thickness: 42mm
• Leg Dimensions: 116 x 42cm
• Made from FSC timber from well managed Northern European forests
• Supplied with drill holes and quality fixings
• Pressure treated for protection against wood rot and decay
• Seats have a hinged mechanism, so can be folded up when not in use
• Flatpacked with easy to use instructions

Maintenance:

• Wood will fade to a pleasing silver tone in natural light. It is perfectly acceptable to leave it like this. You can stain your bench any colour using a water based wood furniture stain. (Follow manufacturers instructions). It is not uncommon, in worked timber, for small splits or shakes to occur, or slight warping in quick drying weather conditions. These will normally go back when humidity rises. This is nature at work and is perfectly normal. It does not affect the strength and durability of your furniture. Wood is a living, breathing material. In dry weather conditions, cracks and tears may appear in the planks which vanish when weather conditions become damper. Certain perceived “flaws” are perfectly normal in wood. This is why the following series of non-conformities are wholly acceptable as falling within industry-accepted tolerance margins:​ Knots in the wood Knots, which have fallen out (max cross size 2 cm), on the wood surface which does not damage products general structural strength Knots, which have fallen out, at the sawing edge of the planks provided that the resulting holes are closed by assembly Discolouration or fading (does not detract from the wood's life span) Straight tears and cracks, provided these are not wide-open cracks which cut through the plank Do not worry if cracks appear at a dry climate. Wood is a living material, which seasons with changes in temperature and humidity. The cracks disappear should the humidity rise again.; Cracks and tears because of shrinkage or desiccation, which do not jeopardise the solidity of the construction. The appearance of resin Torsion and warping provided this does not affect products general structural strength. In dry weather conditions, it is possible for knots to fall out. Any holes thus formed are to be filled using wood filler